--- url: https://deckbuildersfortwayne.com/wood-decks title: Wood Deck Builder Fort Wayne IN | Cedar, Redwood & Pressure Treated description: Wood deck construction in Fort Wayne, Indiana. Pressure-treated pine, cedar, and redwood decks built for Indiana --- Wood Deck Builder Fort Wayne IN | Cedar, Redwood & Pressure Treated - Home › Wood Decks # Wood Deck Builder in Fort Wayne Nothing looks or feels like real wood under your feet. We build wood decks that hold up to Indiana weather using the right species, the right techniques, and proper maintenance guidance. Composite decking has its fans, and we install plenty of it. But wood still accounts for well over half the decks we build in Fort Wayne. There are good reasons for that, real wood costs less upfront, it feels natural underfoot, it stays cooler in the sun, and plenty of homeowners genuinely like the hands on aspect of maintaining their deck every couple of years. The key to a wood deck that lasts in northeast Indiana is choosing the right species for your budget and being realistic about maintenance. Here's an honest look at the options we work with. ## Pressure Treated Pine This is the workhorse. About 70% of the wood decks we build in Allen County use pressure treated southern yellow pine. It's the most affordable wood decking option, it's readily available from Fort Wayne lumber yards, and when it's maintained properly, it lasts 15 to 20 years. ### How Pressure Treatment Works The lumber is placed in a pressurized cylinder and infused with preservative chemicals, currently MCA (micronized copper azole) or ACQ (alkaline copper quaternary) for residential use. These preservatives protect against rot, fungal decay, and termite damage. The treatment penetrates deep into the wood, not just the surface. The copper in modern preservatives is what gives new pressure treated wood that greenish tint. It fades within a few months of sun exposure, and the wood eventually weathers to a silver gray if you don't stain it. ### What to Know About Pressure Treated for Indiana It needs to dry before staining. Fresh pressure treated lumber comes from the mill wet. You need to let it dry for 4 to 8 weeks before applying stain, or the stain won't absorb properly. We typically recommend building in spring and staining in early fall once the wood has had a full summer to dry out. - It checks and cracks. As pressure treated pine dries, it develops surface cracks called checking. This is normal and mostly cosmetic, it doesn't compromise structural integrity. Keeping the wood sealed with a water repellent stain minimizes checking. - Use the right fasteners. The copper preservatives in modern treated lumber are corrosive to plain steel and galvanized fasteners. All screws, nails, joist hangers, and hardware must be rated for ACQ/MCA treated lumber, either stainless steel or the newer double dipped hot galvanized connectors. We use Simpson Strong Tie ZMAX hardware on every treated wood deck. - Ground contact rated matters for posts. Standard treated lumber is rated "Above Ground." Any wood that contacts soil or is embedded in concrete needs to be rated "Ground Contact" (0.40 pcf retention or higher). We use ground contact rated posts on every project. #### Lumber Grades Matter Not all pressure treated pine is the same quality. We use #1 grade or premium grade for deck surfaces, fewer knots, straighter boards, less waste. The #2 grade boards you find at box stores are fine for framing where appearance doesn't matter, but they're often twisted, bowed, and full of knots that weaken the board at those points. ## Cedar Decking Western red cedar is the upgrade pick for homeowners who want a naturally beautiful wood that doesn't require chemical treatment to resist decay. Cedar contains natural oils (thujaplicins) that make it naturally resistant to rot, insects, and fungal growth. ### Pros of Cedar for Fort Wayne Decks - Natural beauty, Cedar's warm reddish brown color is gorgeous, and the tight grain pattern gives it a refined look that pressure treated pine can't match. - Naturally decay resistant, The heartwood (the darker inner wood) contains natural preservatives. You don't need chemicals to keep it from rotting. - Dimensionally stable, Cedar shrinks, swells, and warps less than pine. It lies flatter and stays flatter over time. - Lightweight, Cedar weighs about half as much as treated pine, which makes it easier to work with and puts less load on the structure. - Stays cooler, Cedar doesn't absorb as much heat as dense tropical hardwoods or composite, making it comfortable barefoot in summer. ### The Reality of Cedar in Indiana Cedar is not bulletproof. The sapwood (the lighter outer wood) has no natural rot resistance at all, only the heartwood is protected. Most commercially available cedar contains a mix of heartwood and sapwood, and the sapwood portions will decay at roughly the same rate as untreated pine if you don't seal them. In Fort Wayne's wet dry, freeze thaw climate, cedar still needs a UV protective stain or oil finish applied every 2 to 3 years. Without it, the wood grays quickly, and the surface fibers break down. The natural oils buy you forgiveness if you miss a maintenance cycle, but they don't eliminate maintenance entirely. Cedar costs roughly 1.5 to 2 times more than pressure treated pine. For a 300 square foot deck, that premium typically works out to $2,000 to $4,000 more in material cost alone. ## Redwood Redwood is the premium natural wood option. It's naturally resistant to rot and insects, dimensionally very stable, and has a rich, warm color that photographs beautifully. In Fort Wayne, though, we install redwood decks rarely, maybe two or three a year. Here's why: redwood is expensive and hard to source in Indiana. Most of it comes from California and Oregon, and the shipping cost to Fort Wayne adds significantly to the price. You're looking at 2.5 to 3 times the cost of pressure treated pine for the boards alone. The homeowners who choose redwood usually have a specific aesthetic in mind and are willing to pay for it. If that's you, we're happy to build it. But we'll also show you what cedar looks like side by side, because for many people, cedar scratches the same itch at a lower price point. ## Wood Species Comparison Factor Pressure Treated Pine Western Red Cedar Redwood Board cost (per LF) $1.50–3.00 $3.50–6.00 $5.00–9.00 Installed cost (per SF) $18–30 $30–45 $45–65 Natural rot resistance No (chemical treatment) Moderate (heartwood only) High (heartwood) Maintenance Stain every 2-3 years Oil/stain every 2-3 years Oil/stain every 2-3 years Lifespan 15-20 years 20-25 years 25-30 years Availability in Fort Wayne Readily available Available (may need to order) Special order Splinters More likely, coarser grain Less likely, softer wood Less likely, tight grain ## Staining and Maintenance for Indiana Weather Any wood deck in Fort Wayne needs regular maintenance. The combination of summer UV, rain, humidity, and winter freeze thaw breaks down unprotected wood faster than in milder climates. Here's our maintenance guidance: - Year 1, Let new pressure treated wood dry through its first summer. Cedar and redwood can be stained immediately. We recommend a semi transparent oil based stain that lets the wood grain show through while providing UV and moisture protection. - Every 2-3 years, Clean the deck with a deck cleaner (not just a pressure washer, the cleaner is what does the real work). Let it dry for 2-3 sunny days, then apply a fresh coat of stain. Horizontal surfaces need it more often than vertical railings. - Annually, Sweep debris out of board gaps, clear leaves from between boards in fall (trapped moisture causes localized rot), and check for any boards that need tightening or replacement. #### Best Time to Stain in Fort Wayne Late May through mid June and September through mid October are the ideal stai